Steps To Set Up Qwest DSL On NetGear Wireless Router

Qwest provides DSL services that typically allow the user to utilize the DSL modem. It plays an important role to replace the 2-port modem and router combo with an effective solution. Netgear router integrates best with Qwest that let you stay connected with the strong network.  Use DSL services with Netgear wireless router to replace 2-part modem and router combo with a single solution. The modem combines with the 2 prime routers, Netgear DGN1000 and non-wireless DGN834. Now, this empowers the user to translate the DSL signal with private network services. In addition, these routers are best for sharing connection. For this, connect the Netgear configuration interface and Qwest set-up.  Contact the Netgear router support to get assistance regarding the connection set-up using DSL services. Here are steps that lead you to instantly set-up Qwest DSL on Netgear router:

Step 1: Connect the line cable to the RJ-11 port. The RJ-11 phone port appears slightly smaller as compared to the Ethernet ports.

Step 2: Connect the PC with the LAN Ethernet ports on the back of the Netgear modem. Now, turn on the modem if it’s not installed.

Step 3: Open a browser on your PC and navigate to 192.168.0.1&#8221, without the inverted commas, however this address will vary, on the needful settings. For more info, search for Netgear wireless router setup services. The 192.168.0.1 address represents the default for an unconfigured Netgear router.

Step 4: Type the username “admin” and password “password” when asked by the Netgear configuration site. These are the default username/password for improving the Netgear settings.

Step 5: Tap “Basic Settings” from the navigation menu options.

Step 6: Choose the “Yes” radio option appearing under “Does Your Internet Connection Require a Sign-in?”.

Step 7: Choose “PPPoE (PPP over Ethernet)” from the menu list.

Step 8: Enter the Qwest DSL username/password in the dedicated fields.

Step 9: Ensure your Internet IP address is set as “Get Dynamically From ISP,” and your DNS settings to “Get Enable Auto ISP.”

Step 10: Tap “Apply” to save settings. Now, click “ADSL Settings” in the navigation window.

Step 11: Set “Multiplexing Method” to “LLC-based” using the drop-down menu. Type “8” in the text box next to “VPI” and “35” in the VCI text box.  

Step 12: Click “Apply” and restart the router connection.

source:-

https://contactforservice.wordpress.com/2016/09/29/steps-to-set-up-qwest-dsl-on-netgear-wireless-router/